CAFE by GE for those who are wondering.
We are renovating our house including all new appliances. I have told my partner to make sure we get non smart appliances. This is why.
Yes I can setup a VLAN for it to be on but that’s not the point.
What does the dismiss button do? Or the back button.
Just based on the messages (that could be miss leading) sounds like some features will not work.
Smart appliances are such a ridiculous scam.
I can totally see a point in some of the features.
The other day my wife and I got 20 minutes from home before I said “oh shit I don’t know if I turned the oven off”. Turns out I did, but we had to drive home to check. I would have loved to pull up an app that told me it was actually off, or even if I was on be able to turn it off from there.
With that said, it’s not worth all the extra bullshit in my opinion.
And what if someone else downloads the app and turns in on?
Then the cookies are going to be burnt
I actually find it very nice to get notifications about my toaster oven being preheated or done cooking, or being able to see how much time is left or remotely stop it.
That’s a big, honking “no” from me.
It’d be one thing if the “smart” features were there but only supplemented the basic functionality. It’s another entirely for those basic features to require an internet connection.
Out of curiosity, did the product description indicate the internet connection was required? I’m soon to be replacing some appliances and want to know what to look out for (besides all mentions of “wifi” or “smart”).
did the product description indicate the internet connection was required?
That’s an important question.
That said, we were recently appliance shopping and none of them said that it was required, but a couple of the negative reviews mentioned it.
We ended up choosing one of the very few that didn’t list wifi or an app as a feature. Hopefully there isn’t a stealth modem hidden in there somewhere. I guess we’ll find out next week when it’s delivered…
Thanks for the additional insight.
A coffee maker, I’d just return. But a dishwasher, refrigerator, oven, etc would be a huge hassle I’d want to avoid. I think my best bet, like you said, is to just look for one that has absolutely no mention of w-fi or “smart”.
That’s because air fryer.
There are no dumb air fryers, are there?
Air fryer in this case just refers to the convection oven setting on the stove. It’s not a standalone air fryer.
My microwave is a 1977 Amanda Radarange. It can boil a cup of water in ⅕ of the time a modern microwave can.
Now granted, it has zero fancy settings and a simple number pad that does nothing but set how long you want the microwave to run.
But honestly, this simplicity is a large part of it’s charm. No connectivity needs, no features locked behind paywalls, no extraneous bullshit or never-used features. Just a tool that does only one thing, and does it exceptionally well.
what is that thing wired into a 600v line??
I got a “retrowave” in mint green. It’s dumb, uses a turn dial to set the cook time, stands on little feet like it’s from Rocko’s Modern Life, and looks like it’s from the 50’s. Have a matching toaster and eventually want a matching fridge.
It’s been 4 years and no issues which is more than I can say about a lot of other new appliances we’ve gotten for the house.
For dumb appliances with a fun aesthetics look up 'retro (name of appliance here) and you’ll get all the brands who make stuff like that. It’s the only way I’ve been able to avoid smart garbage so far.
The fridge will likely operate far less efficiently than a modern fridge unless you have it rebuilt.
With that said, a rebuilt fridge - with a more efficient cooling system and better insulation and all seals redone, etc. - does not cost significantly more than a new midrange fridge.
Really!? That’s a bit of a life hack. Good to know.
Usually mass-produced is a fraction of the price of anything bespoke.
Well, most of the fridge is already there. You just need to disassemble, sandblast the metal and paint (if the paint is in poor condition), replace the insulation with closed-cell spray foam, replace the refrigeration system with a modern Freon-free system, reassemble and put new seals on.
An old fridge can be quite simple, structurally speaking. It’s in the 70s and 80s when fridges started getting compact, difficult to repair, and disposable.
Other than the frame, what components aren’t being replaced? I’ll admit my fridge knowledge is mostly theoretical.
Why the fuck does an oven have a touch screen? That’s a horrible idea. Good luck cleaning your kitchen without accidentally hitting “buttons” on the oven! And heaven forbid food splatter turns on your oven broiler.
I would hope it’s a special, heavy-duty kind at least.
They’re on everything because it legitimately just is a good way to get lots and lots of controls and displays on a limited space.
I would hope it’s a special, heavy-duty kind at least.
I’ve seen an expensive microwave with a capacitive touch panel right above the door (and the door was the classic oven style, so attached by the bottom edge). If you ever had a phone with crappy moisture detection, you know where this is going.
You put your food in the microwave. Turn it on and let it heat the food up. Open the door, take the food out and close the door again. Congratulations, your microwave has probably just turned itself back on, because it detected the humid hot air rising from the briefly opened door as you touching the screen. And because most of the touch screen is “touchable”, there’s a pretty good chance this gust of humid air can successfully pick a cooking/heating mode and confirm it.
The microwave randomly navigating its own touch screen happened pretty much every time, passing all the menus and turning on was successful about 10% of the time.
In short, I wouldn’t expect a microwave interface to have any thought put into it.
Oh my god, that’s horrible.
