Looks like my previous post was taken down for violating lemmy.ml’s rule 1, so I made the post again and replaced the word ‘rice’…it should be fine now. Here are the configuration files.
You’d have to copy the files to their designated paths. I’ve laid out the files so that just copying all the dotfiles - and directories - in the repository to your ~ should be enough to load all the configuration files. You’ll also need to install all of the programs and fonts used in this configuration (in the repository’s README.md) to make sure that everything works.
That should be enough to set it up, but let me know if I can help you any further. Oh, and the configuration files are pretty old, so you might need to adjust them to account for any changes made to the programs they’re used for.
![[bspwm] an old setup I made a few years back, and decided to post here](https://lemmy.ml/pictrs/image/d53f99e5-55bc-4259-9b84-5776a601fb7e.png){kind=link}
Thank you for sharing. How do I actually use your shared files to replicate this?
I’ll test in a vm to start whilst I’m learning but I’m smitten and must try!
You’d have to copy the files to their designated paths. I’ve laid out the files so that just copying all the dotfiles - and directories - in the repository to your
~should be enough to load all the configuration files. You’ll also need to install all of the programs and fonts used in this configuration (in the repository’sREADME.md) to make sure that everything works.That should be enough to set it up, but let me know if I can help you any further. Oh, and the configuration files are pretty old, so you might need to adjust them to account for any changes made to the programs they’re used for.