Future Motion, the maker of the Onewheel electric skateboard, is recalling every one of them, including 300,000 Onewheel self-balancing vehicles in the US. Alongside the US Consumer Product Safety Commission (CPSC), the company now seeks to remedy the products after four known death cases — three without a helmet — between 2019 and 2021.
The recall comes a year after Future Motion took issue with the CPSC’s calls for recall and claimed that it tested and found nothing wrong with the Onewheels. At the time, the company issued a press release in objection to the CPSC and called the agency’s statements “unjustified and alarmist.”
Now Future Motion is moving forward with a voluntary recall it chose not to do almost a year earlier. The company is asking owners to stop using their Onewheels until they take appropriate action. For the newer Onewheel GT, Onewheel Pint X, Onewheel Pint, and Onewheel Plus XR, a software update with a new warning system is the remedy.
For early adopters, however, the CPSC and Future Motion are telling owners to stop using and discard the original Onewheel and Onewheel Plus. We asked Onewheel chief evangelist Jack Mudd in an email how many of the original units are affected, but Mudd refused to answer. Mudd also wouldn’t tell us why the company claimed there were no issues and publicly resisted issuing a recall back in 2022.
Mudd did say that the software update for the other models is rolling out worldwide, not just in the US.
Some crashes occurred due to Onewheel skateboards malfunctioning after being pushed to certain limits. The Onewheel GT, Onewheel Pint X, Onewheel Pint, and Onewheel Plus XR will receive a firmware update that will add a new warning “Haptic Buzz” feedback that riders can feel and hear when the vehicle enters an error state, is low on battery, or is nearing its limits and needs to slow down.
“This update is the culmination of months of work with the CPSC,” reads the company’s recall website. Last November, it called the CPSC’s warning about Onewheels “misleading” but stated it would “work to enhance the CPSC’s understanding of self-balancing vehicle technology and seek to collaborate with the agency to enhance rider safety.”
To install the update, owners must connect their Onewheels to the accompanying app and run a firmware update — the process is fully explained in a new video.
For early adopters, however, owners can receive a “pro-rated credit of $100 to the purchase of a new board,” according to Mudd. The credit will only be issued after owners confirm that they have disposed of the old model.
Alongside Future Motion’s blink on the decision to recall Onewheel, the company shared a new video on YouTube highlighting the new Haptic Buzz feature as well as best practices when riding. “We’ve been working closely with the CPSC for over a year in order to develop this new safety feature,” Mudd says in the video. He adds that ignoring pushback or Haptic Buzz “can result in serious injury or death.” It took engineers a while to whip up Haptic Buzz; perhaps it’s something that would not have been ready in a timely fashion after CPSC’s first whistle last year.
Removed by mod
I would still put blame on the dummies who ride these things inappropriately. I see people riding these without any protection and I cringe. I have eaten shit sooo many times on my onewheel that I cant even imagine why someone would even risk it.
I just watched a clip, and I’m trying to understand both the use and why it’s so dangerous. It certainly looks like fun, but what are the benefits?
I can see how not wearing a helmet and other PPE would be stupid. When it hits a certain speed does functionality suffer, or is it just “if you suddenly stop at this speed something in your body is breaking?”
Ehh, a small bump in the road can catch you off guard and throw off your balance if you arent prepared. The way it usually goes is you either get injured in the first few times you use it or it takes a long long time to get injured. In those first few times, if you didnt get the appropriate training on how to bail or how to turn corners then thats when people fall hard.
Its very easy to get confident on the board which is the biggest problem. It can be your first time on the board and you would think ‘wow this is so easy’. Then the second time you ride you decide no helmet and find yourself hitting a bump and flying off cracking you melon open.
They didn’t have the ability for haptic feedback at the beginning, they had to create it. There’s no haptic motor in the board, they have to use the main motor to make vibrations without effecting the ride or balance. Should they have looked into it at the beginning, yes, is it as irresponsible as not turning on a system that already exists, no.
If only they had manufacturing control over the product, they could have built it in or something.
They built the devices for years with user complaints and injuries asking for a better warning system.
And then they release a whole NEW product lineup without any safety improvements from years of experience.
This is just simping, you’re ignoring the facts and the reality and are somehow finding it understandable that a device manufacturer never manufactured devices with safety in mind, after years of being told to manufacturer devices with safety in mind…
Well, the new lineup does have a safety alarm. Unfortunately it’s uselessly quiet. You can’t hear it at all over the wind noise when going 20 mph, roughly the speed it typically goes off.