Edit: so it turns out that every hobby can be expensive if you do it long enough.

Also I love how you talk about your hobby as some addicts.

  • 👍Maximum Derek👍@discuss.tchncs.de
    link
    fedilink
    English
    arrow-up
    13
    ·
    1 year ago

    Electronics / microcontrollers.

    Took just a few months to go from, “I can make a wifi connected weather station for like $20 in components!?” to “oscilloscopes cost how much?”

    • choss@lemmy.ml
      link
      fedilink
      arrow-up
      0
      ·
      1 year ago

      I would love to read about this $20 weather station! Do you maybe have a link?

      • 👍Maximum Derek👍@discuss.tchncs.de
        link
        fedilink
        English
        arrow-up
        0
        ·
        1 year ago

        Mine is pretty basic but is built on the shoulders of giants. Also that $20 was from pre-pandemic / pre-chip shortage prices. I’m guessing it’s more like $35 now, or maybe high $20s from ali express.

        I use Home Assistant for home automation. It has a now official addon called ESPHome for easily configuring esp devices and adding them to Home Assistant.

        I bought some cheap dev boards off amazon and thankfully they worked
            an esp8266 microcontroller with IC2 headers and a microusb port already onboard
            a bmp280 that measures temp, humidity, and barometric pressure
            a lux sensor with a plastic dome over the top
        I soldered them together on a prototyping board
        

        All the components were supported by esphome, so I just needed to write the device config and then flash the devboard via esphome (in a web browser) over the built in usb.

        I 3d printed a housing for it, but you can also buy boxes. It needs airflow but also needs to stay dry. You can use a spray sealant to help avoid corrosion from ambient humidity. I skipped that step because I want to see how quickly it becomes problematic… and I should probably check on that.

        • gregoryw3@lemmy.ml
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          Just an fyi bmp280 is not real temperature but an estimation based on air pressure.

  • Admiral Patrick@dubvee.org
    link
    fedilink
    English
    arrow-up
    10
    ·
    1 year ago

    Self-hosting apps / homelab

    Getting used enterprise gear is not prohibitively expensive, but the electric bills balloon very quickly.

    • PlexSheep@feddit.de
      link
      fedilink
      arrow-up
      4
      ·
      1 year ago

      I currently bought an old desktop from a friend that I use as my Homeserver.

      • I bought 3 HDDs for storage
      • I rent a VPS
      • I rented Proton to host mail for my domain, but switched to netcup groupware because that sucked.
      • Some domains
      • Electricity

      Wow I thought it was way more.

      One time costs: ~500€ Monthly costs: ~15€ Plus electricity, but I have solar. I assume it’s about 150€/year

      But I’m a cheap selfhosted, but eventually, I will have a huge ass Enterprise Level Rack in my basement.

  • TheButtonJustSpins@infosec.pub
    link
    fedilink
    English
    arrow-up
    9
    ·
    1 year ago

    I bought myself a raspberry pi for my birthday a few years ago.

    I now have thousands of dollars in hardware sitting in a server rack in my office. Whoops.

    • droans@lemmy.world
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      A single 1TB drive should be enough for my Plex server, I said.

      123TB isn’t enough, I need more 18TB hard drives, I said.

  • Yonrak@feddit.uk
    link
    fedilink
    arrow-up
    9
    ·
    edit-2
    1 year ago

    Coffee.

    I blame James Hoffman entirely.

    Within a year I went from:

    Drinking instant coffee at home, but really enjoying “proper coffee”

    To

    Buying a cafetiere (~£15) + preground coffee

    To

    Buying a Nespresso (~£60 on offer) + pods

    To

    Buying a budget espresso machine (~£120) + preground coffee

    To

    Wasting my money on a cheap manual coffee grinder (~£50) + beans

    To

    Immediately replacing it with an entry level Sage grinder (~£170)

    To

    Buying an entry Level “proper” espresso machine (~£700)

    It took me a good 2-3 weeks of practicing and dialling in before pulling a good shot of coffee that I’d actually want to drink, but by that point it was also about learning a new skill, learning how different aspects of the process affect the end result and learning how to make all sorts of different espresso-based drinks.

    My girlfriend thought I was nuts at first, but a year or so later even she agrees it was worth the investment. I still for the life of me can’t get the hang of latte art though.

    The problem is now though that I’m a waaaay more critical of coffee from coffee shops, because I spent a long time making bad coffee whilst learning!

    • abraxas@sh.itjust.works
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      I can’t believe I answered “board games” to this before. Yes, espresso wins it over. I just got an espresso machine for my 10th anniversary (price too high for me to be willing to admit). And here I have a wishlist of $500+ in “devices” for it.

      Like you, I’m about 3 weeks in and just now getting my burr grind just right for that perfect 26s shot. Luckily my vendor was giving out a free badass scale. It keeps telling me how bad my shot is.

      I still for the life of me can’t get the hang of latte art though.

      Ditto. I just got my first “correct emulsified foam” today. Usually I end up with hot milk with hot whipped milk on top.

    • BraveSirZaphod@kbin.social
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      Espresso is the line I won’t let myself cross (and I don’t have the counter space lol), but the $350 for the Kinu M47 was hard to swallow.

      Plus side, it’s also a great espresso grinder if I do ever eventually head down that road.

    • Lorax@lemmy.ca
      link
      fedilink
      arrow-up
      0
      ·
      1 year ago

      Similar but different : tea! You go from cheap bagged tea to going down the rabbit hole of loose leaf variations, temp control kettles, brewing vessels and brewing styles.

      • abraxas@sh.itjust.works
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        Even low-grade Dragonwell is eyeopeningly expensive. And nothing tastes quite like it.

        It tastes a ground up $20 bill soaked in hot water ;)

    • plactagonic@sopuli.xyzOP
      link
      fedilink
      arrow-up
      3
      ·
      1 year ago

      I unintentionally grow weed because I made some tincture for grandma.

      Now it just grows on my garden and I can’t get rid of it.

      • azimir@lemmy.ml
        link
        fedilink
        arrow-up
        0
        ·
        1 year ago

        One of it’s many nicknames is ditchweed for a reason. It’s a weed like any other. The US spends millions per year burning it out of ditches on the side of the road all around the country.

    • Zippy@lemmy.world
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      2000 into my fully automated hydroponic weed factory. Another 500 to make my nutrient solutions from scratch. Mind you that 500 dollars when making from scratch likely last 20 years of crops. It does make a good 1.5 pounds of dry weed every 3 to 4 months with the for legal plants allowed in Canada. I barely smoke so give nearly all away.

      Three year prior, harvested a crop down right before going to Mexico for three month trip. Was still some shoots barely growing so for shits and giggles I turn the lights back to 22 hours per day to see if they would go back to the veg state. Have camera so can watch it remotely. Shit starts fully growing like a new plant. Anyhow COVID puts a wrinkle in my return. Ended up in Mexico for 18 months. Over that time, thing kept growing like nuts. Automation on water replacement and nutrient injection along with pH monitoring. Became sort of a how long can this thing go with near zero human intervention. Had only to send my brother in law in three times to cut it down and refill my nutrient injectors from solutions I made before leaving.

    • MaggiWuerze@feddit.de
      link
      fedilink
      arrow-up
      0
      ·
      1 year ago

      In Germany we will be allowed to grow some for private use come next year. I have no idea what to get yet, but I will just plant it in a planter in the garden and hope that it works I guess :D

      • Riyria@sopuli.xyz
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        I hope you’ll be able to get seeds and strains imported from the US and Canada. I smoked weed in Germany while I was living there in 2015 a few times and it was the worst weed I’ve ever smoked. It tasted weird, smelled bad, and didn’t even get me high. When I asked someone about it they were just like “weed isn’t as strong here as it is in the U.S.”

        • neal33@lemm.ee
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          There are European based seed banks. Also they share a border with the Netherlands.

        • MaggiWuerze@feddit.de
          link
          fedilink
          arrow-up
          1
          ·
          1 year ago

          I think that’s still up for debate. Let’s see. But I haven’t been smoking for quite some time, so maybe my first batch is fine being on the weak side

          • Riyria@sopuli.xyz
            link
            fedilink
            arrow-up
            1
            ·
            1 year ago

            Have you smoked outside of Germany? I only ever smoked in Germany so I don’t know how it is anywhere else in Europe so maybe my experience is the problem, but I have friends who have come to the US and said weed is way stronger here.

  • snowe@programming.dev
    link
    fedilink
    arrow-up
    7
    ·
    1 year ago

    I’m not sure it can get worse than bird watching. Completely free to start. Then you are like “man I wish I could see that bird over there” so you buy some binoculars. Then you think “dang this bird is moving too fast I still can’t identify it, maybe I should try photographing it”. Two months later you’ve spent 10k because bird photography is apparently the most intense kind of photography. Turns out photographing very tiny things that move very fast from very far away is very difficult and the lenses you need start at thousands of dollars and go up to tens of thousands of dollars. That isn’t including the camera body, which you probably want very fast autofocus on, along with bird eye tracking, which hardly comes on any cameras at all.

    Yeah…

  • Luxsidus@lemmy.ml
    link
    fedilink
    arrow-up
    7
    ·
    1 year ago

    Mechanical keyboards. The next one is my endgame, I swear. Just one more groupbuy for those keycaps. It never truly ends.

    • Nindelofocho@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      mechanical keyboards go two ways, you start shelling out for way overpriced cncd metal or wacky boards or you become a pcb designer and make a board that could be used for camping

    • r1veRRR@feddit.de
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      And then it turns out some horrendously ugly piece of plastic (like the Kinesis Advantage 360) is better for actually using.

    • AggressivelyPassive@feddit.de
      link
      fedilink
      arrow-up
      0
      arrow-down
      1
      ·
      1 year ago

      I never got the appeal of mechanical keyboards. If you actually have to type all day, a proper flat keyboard like in the old MacBooks ('09-ish) is way nicer and costs much less.

  • WhyJiffie@sh.itjust.works
    link
    fedilink
    arrow-up
    6
    ·
    1 year ago

    This is not the first post where I feel it but I love it so much that we have a lot of people on Lemmy that can talk about things not related to computers!

  • Moonguide@lemmy.ml
    link
    fedilink
    arrow-up
    6
    ·
    1 year ago

    Coffee. I’m in a coffee producing country. It could be as cheap as grabbing a bag from the coffee institute (really good and cheap), a cloth filter and call it a day. Instead, I’m on my second espresso machine, fourth grinder, second portafilter set, and have all the doodads to make it just how I like it.

    • ringnal@feddit.nl
      link
      fedilink
      arrow-up
      0
      ·
      1 year ago

      So the other day my brother came visiting and brought with him a new portafilter for my run of the mill espresso machine. We messed around with setting the grinder, measuring the exact amount of coffee, and so on and we did get a decent cup of coffee. Thing is, I can live with my old bad coffee, my peasant taste buds don’t really tell the difference, so I’d rather spend my dough on the other 99 things that deplete the bank account. But to you, who make a passion out of brewing coffee, more power to you!

      • Moonguide@lemmy.ml
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        Oh I started that way too. I’m not as deep into the rabbithole as I could be, but I’ve gotten far enough I know how to make a good enough cup of joe (which by all accounts of people whom I’ve made coffee for, is pretty damn good). I’ve had to balance that hobby with my other hobbies, and well… It turned out to be my cheapest hobby, sadly.

    • Appoxo@lemmy.dbzer0.com
      link
      fedilink
      arrow-up
      0
      ·
      1 year ago

      Same with tea…Once you get to loose tea , the step to importing tea is not very far.
      Oh the import tax and shipping :(

  • the_seven_sins@feddit.de
    link
    fedilink
    English
    arrow-up
    5
    ·
    1 year ago

    Cycling.

    You can certainly do it on an 300€ bike, but who would want that if you can pay 300€ for the helmet alone.

    • foxinabox@lemmy.ml
      link
      fedilink
      arrow-up
      0
      ·
      1 year ago

      Same problem. I have now 5 bikes:

      • Old, but nice city road race bike (I needed a bike…)
      • Nice road race bike (racing bikes are nice, let’s look at high-end ones, they are surely not that expensive…)
      • Mountain bike (wait I cannot go to this close-by trail with my road bikes…)
      • Touring bike (GF: let’s cycle to this remote place … )
      • Triathlon bike ( here I got too ambitious… )
      • NOW: I want a gravel bike, they are so nice, please send help ;)
  • danhab99@programming.dev
    link
    fedilink
    arrow-up
    4
    ·
    1 year ago

    Mechanical keyboards. I have a collection of 5 totalling to way more than anybody would expect keyboards to cost.

  • ickplant@lemmy.world
    link
    fedilink
    arrow-up
    4
    ·
    1 year ago

    Knitting. Super cheap to start, you can pick up a set of needles and some acrylic yarn for under $20. But when you start getting into nice yarns and bigger pieces, you are spending hundreds of dollars on yarn alone for a blanket or a sweater. And you want nice needles in all sizes as well as all types (double pointed, regular and circular)… more hundreds of dollars.

    Moral of the story is if a friend knits you something with nice yarn, please appreciate it. Lots of effort and thought went into it.

    • Hepco@lemmy.world
      link
      fedilink
      arrow-up
      0
      ·
      1 year ago

      Just started crocheting, and I’m just holding myself back from buying all the yarn, it’s gonna get bad

  • SlowNPC@kbin.social
    link
    fedilink
    arrow-up
    4
    ·
    1 year ago

    Playing music. Started on a shitty hand-me-down acoustic guitar. Got a better guitar. Got an electric. Got a better amp. Got a couple of pedals. Got a better amp. Got like 6 more amps, some cabs, 5 more guitars, a huge pedalboard, a cello, a keyboard, an audio interface, attenuators, mics, etc etc.

    You gotta understand… I need all this stuff. There are subtle differences that you’ve never noticed before but will probably hear once I do an a/b comparison for you, and I absolutely must get an AC15 next to round out the collection instead of buckling down and recording something.

  • plactagonic@sopuli.xyzOP
    link
    fedilink
    arrow-up
    4
    ·
    1 year ago

    For me it is maybe camping.

    I just tested my new sleeping bag - under 0.5kg rated to -5°C. And realised that I bought/ replaced lots of gear to higher quality gear over few years.

    • Nindelofocho@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      trying to get a motocamping setup going. Spent over $200 at REI last weekend just for a tarp shelter and accoutrements and I still have 75% of the list to go which is only NECESSARY items…

    • luckyhunter@lemmy.world
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      Camp stoves and fuel! I can buy a lot of bic lighters and cheap metal camping mugs for the cost of a dang Jetboil stove and fuel.