L4sBot@lemmy.worldMB to Technology@lemmy.worldEnglish · 1 year agoEthernet is Still Going Strong After 50 Yearsspectrum.ieee.orgexternal-linkmessage-square79fedilinkarrow-up1409arrow-down16file-textcross-posted to: computerhistory@lemmy.capebreton.socialtechnology@lemmit.onlinehardware@lemmit.onlinehardware@hardware.watchtechnology@lemmy.mlhackernews@lemmy.smeargle.fanshackernews@derp.foo
arrow-up1403arrow-down1external-linkEthernet is Still Going Strong After 50 Yearsspectrum.ieee.orgL4sBot@lemmy.worldMB to Technology@lemmy.worldEnglish · 1 year agomessage-square79fedilinkfile-textcross-posted to: computerhistory@lemmy.capebreton.socialtechnology@lemmit.onlinehardware@lemmit.onlinehardware@hardware.watchtechnology@lemmy.mlhackernews@lemmy.smeargle.fanshackernews@derp.foo
minus-squareTurnItOff_OnAgain@lemmy.worldlinkfedilinkEnglisharrow-up84arrow-down1·1 year agoThe foreskin gets in the way when pulling it out of the port though.
minus-squareClockworkOtter@lemmy.worldlinkfedilinkEnglisharrow-up16·1 year agoI’m pretty sure your ethernet cable shouldn’t be getting hot
minus-squarehavokdj@lemmy.worldlinkfedilinkEnglisharrow-up6·1 year agoWhat about getting hot for your Ethernet cable? Your nice, long, sexy Ethernet cable? With that wide bandwidth? That low latency? I’m getting wet just thinking about it. Let’s LAN party ;)
minus-squareHonytawk@lemmy.ziplinkfedilinkEnglisharrow-up9·1 year agoChoke me daddy And spank me with this:
minus-squareBearOfaTime@lemm.eelinkfedilinkEnglisharrow-up6arrow-down1·1 year agoI’ve never had that problem 😉
minus-squareatx_aquarian@lemmy.worldlinkfedilinkEnglisharrow-up4·1 year agoI always crimp my own, including using slide-on/slide-off hoods. That way I can back the hood off before plugging it into the port, which keeps it easy to disconnect, and I can slide it back on before pulling it through a tight spot.
minus-squareTurnItOff_OnAgain@lemmy.worldlinkfedilinkEnglisharrow-up3·1 year agoI crimp my own, but never used the hoods before on self made. Usually I run it where it needs to be then put the end on
The foreskin gets in the way when pulling it out of the port though.
Tell me about it.
Hot
I’m pretty sure your ethernet cable shouldn’t be getting hot
What about getting hot for your Ethernet cable?
Your nice, long, sexy Ethernet cable? With that wide bandwidth? That low latency? I’m getting wet just thinking about it. Let’s LAN party ;)
Choke me daddy
And spank me with this:
I’ve never had that problem 😉
I always crimp my own, including using slide-on/slide-off hoods. That way I can back the hood off before plugging it into the port, which keeps it easy to disconnect, and I can slide it back on before pulling it through a tight spot.
I crimp my own, but never used the hoods before on self made. Usually I run it where it needs to be then put the end on