• r00ty@kbin.life
      link
      fedilink
      arrow-up
      18
      ·
      9 months ago

      I thought you guys had 240v circuits precisely for this kind of load? On a decent 30a 230v circuit (they generally don’t use anywhere near 30a though) here in Europe it takes considerably less than that. I’d say mine takes 5-8mins for 230c (which is around 450f) and it has a rated power of 3500w.

        • r00ty@kbin.life
          link
          fedilink
          arrow-up
          1
          ·
          9 months ago

          I guess it likely comes down to power rating, then. Also, with our old oven it used to take around 2x the time the current one does. That was just because the seal on the door was old and worn.

          • force@lemmy.world
            link
            fedilink
            arrow-up
            3
            ·
            edit-2
            9 months ago

            AFAIK almost any appliance labelled/presumed to be 220V in the US is actually 240V unless it was made before the 50s, because we aren’t allowed to have nice things (like accuracy)

            • bitchkat@lemmy.world
              link
              fedilink
              English
              arrow-up
              1
              ·
              9 months ago

              Yes. The USA switched our mains voltage from 110/220 to 120/240 about 50 years. There is a tolerance built in (10%) so that if a circuit is actually running at 100 or 220 then its within specs. A 120v circuit can run anywhere from 108 volts to 132 volts and be within spec. Its a pet peeve of mine when people say 110/220.

    • gmtom@lemmy.world
      link
      fedilink
      arrow-up
      10
      arrow-down
      2
      ·
      9 months ago

      No its electric.

      Could be a US low voltage issue? Since im European.