• Azzu@lemm.ee
    link
    fedilink
    English
    arrow-up
    25
    ·
    8 months ago

    I calculated it, this looks like 32 x 48 blocks, so a total volume of roughly 15.6 m³. Considering that they’re going to be loose in the box and not perfectly stacked, I’d double that volume. This would result in a box set, if it were a cube, with ~3m sides. The weight would be 10.53 tons.

        • NeptuneOrbit@lemmy.world
          link
          fedilink
          English
          arrow-up
          5
          ·
          8 months ago

          The dollar bills have a slight hollow indent, so you can’t just model them as a solid prism of ABS. I assume is the question here. You might be off by about 15%

          • Eiim@lemmy.blahaj.zone
            link
            fedilink
            English
            arrow-up
            5
            ·
            edit-2
            8 months ago

            The part pictured here seems to be 3069px7 with the base color incorrectly set to white. In any case, it’s 3069, the standard 1x2 tile. Thanks to the folks at LDraw who have modeled every Lego brick in detail (because of course people have done that), we get a volume of 303.8mm³, with a bounding box size of 409.6mm³, for a density of about 74%. But, Bricklink can just directly tell us the mass of a 1x2 tile is 0.26g, so the total mass is 10.5 metric tons.

            • Azzu@lemm.ee
              link
              fedilink
              English
              arrow-up
              3
              ·
              8 months ago

              That’s exactly the weight value I used in my original calculation :)

              • Eiim@lemmy.blahaj.zone
                link
                fedilink
                English
                arrow-up
                1
                ·
                8 months ago

                Bricklink is a site for individuals/small business to buy and sell primarily individual Lego pieces, so it’s important for shipping calculations to have reasonably accurate weights of all the pieces. Their weights are therefore contributed by those sellers. Although now that LEGO Group owns Bricklink, you’d think they could just slide them the numbers.

          • Track_Shovel@slrpnk.netOP
            link
            fedilink
            English
            arrow-up
            1
            ·
            8 months ago

            Bingo.

            In anything that does not perfectly stack, you have to assume a bulk density (density that accounts for porosity)

            This is common in soil science since soils are only 50% solid.